Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction Manual SSG
_________________________________________________________________________________________________________________
Brief inspection before putting into service
Please check whether you received all parts mentioned in the basic supply
Basic supply:
1
hydraulic foot pump SHP 5
1
10m High pressure hose with coupling to connect to the foot pump SHP 5
1
Cutting head SSK...
1
Instruction manual with Test certificate
1
case
1
Grounding cable 25 mm² to connect to the cutting head
according to DIN EN 50340 (attached to grounding rod)
1
Earthing pillow
Accessory:
1
Earthing pillow with cable 25 mm²
Please check your bill of delivery whether you received all requested parts.
Symbols
Safety warnings
Please do not disregard these instructions in order to avoid human injuries and
environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the unit.
Instruction Manual
for the hydraulic safety cutting unit Type SSG65, SSGG85, SSG105, SSGG105, SSG 120/3
Serial number ........................................
1. Introduction
Attention
Before starting to use the unit please read the instruction manual carefully.
Use this unit only for approved operations.
Cutting of cables with this equipment must only be done by specially trained personnel.
The minimum age is 16 years.
This instruction manual must remain with the unit for the whole time.
The operator must
- guarantee the availability of the instruction manual for the user and
- make sure that the user has read and understood the instruction manual.
Prior using the safety cutting unit for the first time and afterwards at least once annually the
user of this unit must be instructed by a safety engineer about the special risks involved while
working with this unit and the necessary precaution measurements.
All manuals and user guides at all-guides.com
page 16
Werbung
Inhaltsverzeichnis
