Controls And Displays - Seca 869 Bedienungsanleitung Und Garantieerklärung

5. Operation

Controls and displays

The controls and display are in the display part.
Switch scale on and off
press briefly
hold down
in function menu s increase value
press briefly
hold down
in function menu s decrease value
Activating the BMI function, Confirmation
Correct weighing
– Press the start key with no load on the
scale.
se(a 8. 8 . 8 . 8 . 8 .
, and
utively in the display. The scale is then
automatically set to zero and ready to
use.
– If necessary, switch the weight display
(see page 19).
– Read the weighing result off the digital
display.
– If a load greater than 250 kg or 550 lbs
is placed on the scale,
the display.
– To switch off the scale, press the start
key again.
18
s switch between kg and lbs
s switch between lbs and sts
s activate/deactivate hold function
s set display to zero, activate/deactivate tare function
0. 0
appear consec-
St0P
appears in