Vertical Steam; Anti-Drip Function; Anti-Calc Function; Care And Cleaning - Scarlett SC-1333S Bedienungsanleitung

CAUTION: If the steam iron has been used for a long time, is hot and there is no water. Do not refill it with water until the
steam iron has cooled down.
BURST OF STEAM
· The burst of steam feature provides additional steam for removing stubborn wrinkles.
· Turn the temperature control dial to the
· Turn the variable steam control to the maximum position.
· Press the powerful steam button to release the burst of steam.
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button pressed for more than 5
seconds.

VERTICAL STEAM

· Ensure that there is enough water in the water tank.
· Stand the steam iron on its heel rest on an iron-safe surface and plug it.
· Set the temperature control dial and variable steam control to their maximum positions.
· Hold the iron vertically and press the steam burst button, an intense steam will be ejected from the soleplate.

ANTI-DRIP FUNCTION

· In this case the anti-drip function automatically activates to prevent vaporization, so that you may iron the most
delicate fabrics without the risk of spoiling or staining them.

ANTI-CALC FUNCTION

· Your steam iron has anti-calc function that protects your appliance from scale.
WHEN YOU FINISHED IRONING
· Set the temperature dial to the minimum position.
· Remove the mains plug from the wall socket.
· Stand the iron on heel rest.

CARE AND CLEANING

· Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
· Clean the exterior with a damp cloth and wipe dry.
· Do not use abrasive cleaners.
WATER TANK CLEANING
· Fill the half of the water reservoir.
· Set the temperature control to its maximum position.
· Insert the main plug into the wall socket.
· Allow the iron to heat up until the indicator light goes out.
· Unplug the steam iron.
· Holding the iron horizontally over the sink, change the steam control to the maximum position.
· Press the powerful steam button.
· Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out.
· Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.
STORAGE
· Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow steam iron cool
down completely.
· Wrap the cord around the heel rest.
· To protect the soleplate, place the steam iron in an upright position on its heel rest.
RUS
·
.
·
·
·
·
·
·
,
·
·
·
·
·
www.scarlett-europe.com
or
.
,
.
,
,
.
.
.
position.
,
.
.
,
,
,
,
.
5
,
.
.
.
,
.
,
.
,
.
.
SC-1333S