Operating Time - Philips Aqua Plus 8000-Serie Bedienungsanleitung

English
10

Operating time

Using the appliance with Turbo power mode
Using the appliance with Normal power mode
(Setting 2)
Using the appliance with Eco power mode (Setting
1)
* Based on use of the appliance with the Aqua Nozzle
User interface signals and their meaning
Signal Description of signal
The signal '00' and the battery icon flash on the
display.
A number between '00'and '90' flashes on the
display.
The number '100' lights up on the display.
The battery symbol lights up on the display.
A number between '00' and '10' together with the
battery icon flash on the display.
The display shows a flashing square and the
orange filter cleaning icon also flashes.
Error code 'E1' lights up on the display.
Note: When the appliance is charging on the
charging station, the E1 error code may look like
the number 13.
Error code 'E4' lights up on the display.
Note: When the appliance is charging on the
charging station, the E4 error code may look like
the designation h3
Up to 28 minutes
Up to 35 minutes
Up to 80 minutes*
Meaning of signal
The battery is empty.
The appliance is charging.
After a full charging cycle, this signal
appears to show that the
rechargeable battery is fully charged.
The appliance is in standby mode
with a fully charged battery.
The rechargeable battery of the
appliance is low.
It indicates the recommended time
to check and clean the filter (Fig. 9) to
ensure the best performance of the
appliance.
This indicates that the appliance has
been stored or charged at a
temperature below 5 °C. Move the
appliance to a warmer room. Do not
store or charge the appliance at a
temperature below 5 °C or above
40 °C.
The roller brush in the 360 ° suction
nozzle or in the mini Turbo brush has
become blocked and cannot turn
freely. Switch off the appliance and
check the roller brush for
obstructions or entangled hairs.