Safety Warnings; Instrument Setup - Megger Ots100Af Schnellreferenz

G

SAFETY WARNINGS

Safety warnings and precautions must be read and
understood before the OTS100AF/OTS80AF/OTS60AF is
used. They must be observed during use.
The OTS100AF/80AF/60AF must only be used in the
■
way intended and for the stated purposes described
by Megger.
The OTS100AF/80AF/60AF must not be used if any
■
part of it is damaged.
The OTS100AF/80AF/60AF must be properly earthed.
■
A supplementary earth terminal is provided.
Position the OTS100AF/80AF/60AF so that power can
■
be easily removed.
The OTS100AF/80AF/60AF must not be used in wet
■
locations or with rain falling on the instrument.
The OTS100AF/80AF/60AF must only be used for
■
testing electrical grades of insulating liquids. No
other objects or substances should be placed in the
test chamber.
The OTS100AF/80AF/60AF must only be used with
■
one of Megger's precision test vessels or VCM100D/
VCM80D correctly fitted on the support horns in the
test chamber.
Replacement fuses must be of the correct type and
■
rating.
Calibration or repair must only be carried out by a
■
Megger qualified repair facility.
The test chamber must be kept clean and free from
■
lint or other fibres.
The OTS100AF/80AF/60AF weighs 30 kg. Care
■
should be taken when lifting the instrument.
It is prohibited to insert foreign objects into any gap
■
on the instrument before or during a test.
Unit must be used in a well ventilated location. Small
■
quantities of Ozone may be created after prolonged
testing.
All manuals and user guides at all-guides.com
Symbols used on this instrument
G
F
a
c
u
f

Instrument setup

The OTS100AF/OTS80AF/OTS60AF must only be used by
suitably trained persons.
Out of the box
List of items
Accessories (supplied separately)
Caution: refer to accompanying notes
Danger high voltage, risk of electrical shock
DC voltage
AC voltage
Equipment complies with current EU
Directives
Earth terminal
Fuse
l
USB termina
Equipment complies with 'C tick'
requirements
Do not dispose of in the waste stream
OTS100AF/OTS80AF/OTS60AF Oil test set instrument
■
400 ml precision vessel assembly
■
Electrode set(s) as ordered & feeler gauge set
■
Impeller stirrer lid assembly if ordered
■
Magnetic bead stirrers (2) and retriever
■
User manual CD
■
Power lead as ordered
■
Vessel assembly 150 ml
■
VCM100D/VCM80D voltage meters
■