Mobile App And Wi-Fi Connection - CONGA 3890 Titanium Bedienungsanleitung

ENGLISH
overnight. When it is fully charged, it may carry out the first cleaning cycle and save the first
map. To do so, activate Auto cleaning mode and Eco power level. It is very important to follow
these indications for the robot to recognize each and every corner in the house and to create
a complete map.
If the house where the robot is going to be used is too big and the robot runs out of battery,
do not worry. The robot features TotalSurface 2.0 technology, so when it returns to the
charging base, it saves the full map and those that have not been completed. Once it is
charged again, it resumes the cleaning cycle from the point it has stopped until it maps the
whole surface. The robot keeps on mapping constantly, therefore it adapts independently to
each house's features and continuously improves previous maps.
4. OPERATION
Once the robot's light indicator changes from oscillating orange to steady blue, the battery is
fully charged and the robot is ready to operate.
The robot cannot operate with low battery.
Recommendations: Remove all cables and obstacles from the floor before operating the
robot in order to avoid accidents and damage.
5.1. Robot buttons
Fig. 12.
Auto mode
Press the power button on the robot for it to start cleaning automatically, first a cleaning
cycle in Edge mode and then another cycle in and organized zigzag motion, recognizing which
areas it has cleaned and which ones it has not. The robot will automatically plan the cleaning
route as it is cleaning. If during this mode the robot is controlled manually, the robot will
calculate the route again and could go through previously cleaned areas. In order to ensure
efficient cleaning, do not operate it manually during auto mode cleaning.
Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle, the
robot will smartly return to the charging base automatically and, once it is fully charged, it
will resume the cleaning process from the same point, offering a high-efficiency cleaning.
During cleaning, the robot will stop briefly to evaluate the area and calculate the cleaning
route (this stop will vary depending on the house conditions).
Note: The robot cleans in an organized way and per 4x4 m squared areas, therefore it might
leave the room where it is cleaning to finish off the delimited area. Do not worry, the robot
will clean all the accessible surface.
38
Back home mode
Press the back home button on the robot in order to send the robot to the charging base.
This mode can be activated during any other cleaning cycle and the robot will stop cleaning
and return to the charging automatically. The robot will take the shortest route back to the
charging base thanks to its map memorizing and the smart back home function. When a
cleaning cycle has been completed or the robot's battery is low, the robot will also return to
the charging base to avoid running out of battery.
Recommendation: Remove the Wet & dry tank during charging.

5. MOBILE APP AND WI-FI CONNECTION

In order to access all the robot's functions from wherever you are, it is suggested to
download the Conga 3000 App. You will be able to control the robot in the most efficient way,
enjoying the excellence of cleaning.
App advantages:
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Spiral, Edge, Manual, Twice, Restricted
area, Spot, Smart area, back home or Scrubbing.
View how the robot creates an interactive map as it is cleaning.
Manage rooms smartly through its Room Plan function, which allows you to join, separate or
name rooms. Plus, create and schedule your own cleaning plans by selecting the rooms you
want to clean, the mode and power level.
Check the cleaned surface and the time taken.
Check the cleaning history.
* This model is compatible with voice virtual assistants Google Assistant and Alexa
Configuration:
Fig. 13.
Download the Conga 3000 App from App Store or Play Store.
Create an account with your e-mail and password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
ENGLISH
39