Installation Of The Smoke Detector - Hekatron Genius Hx Montageanleitung

7. Installation of the smoke detector

All manuals and user guides at all-guides.com
Hekatron recommends an installation with screws and wall plugs in order to
ensure a safe and permanent connection.
Installation with screws and wall plugs:
Use the supplied fixing material for installation of the smoke detector. If
other screws are used, these must not project into the base more than
5 mm.
We recommend the use of a fillister head screw DIN ISO 7049, cross recess
H, form C, 3.5 x 25 mm. The mounting surface must be even!
Fastening by means of a Hekatron adhesive pad:
Only the Hekatron adhesive pad may be used for installation by means of an
adhesive pad. This has to be ordered separately (see item 17 Ordering data).
Surfaces on which the adhesive pad is to be mounted have to be smooth,
even, undamaged, clean and free of dust, grease and solvents. The adhesive
pad must not be used on porous surfaces, e.g. plaster, emulsion paint,
plywood, chipboards and hardboards, chalky or loose paintings, crumbling
plaster or dirty surfaces.
Adhesive pads may leave residues after disassembly!
The use of the adhesive pad is always at the user's own risk. When us-
ing the adhesive pad, please pay attention to the mounting instructions for the
adhesive pad for smoke detectors Genius H and Genius Hx
® ®
Part no. 7002705.
43
E