Data
Current:
Not required. Power is supplied through "Power Over Ethernet".
Ethernet cable not included ex works.
The switch must correspond to PoE-capable (IEEE802.3af standard. /
350mA) and the Performance Class 3. Alternatively, a corresponding
PoE-Injector 1Gbit/s is possible. Note: cable supply line length of max.
75m / 240 ft.
Power input: max. 13VA
Permissible PoE input voltage: typical 48V (min. 36V, max. 57V)
MA 2/4 Port WM
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
26