Explanation Of The Symbols; Safety Instructions - Batavia MAXXPACK 18 V Bedienungsanleitung

DEAR CUSTOMERS
Instruction manuals provide valuable hints for
using your new device. They enable you to use
all functions, and they help you avoid misun-
derstandings and prevent damage. Please
take the time to read this manual carefully and
keep it for future reference.

EXPLANATION OF THE SYMBOLS

Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Risk of flying objects. Keep
bystanders away from the work
area.
Always wear hearing protection. The
effects of noise can cause hearing
loss.
Wear a dust mask. When working
with wood and other materials,
harmful dust may be generated.
Work with asbestos containing
materials is not permitted!
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Wear safety gloves!
Do not press the spindle lock button
while the motor is running.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
Do not dispose of electric power
tools with domestic refuse.
SAFETY WARNINGS COMMON FOR
GRINDING OR ABRASIVE CUTTING-OFF
OPERATIONS:
a. This power tool is intended to function
as a grinder tool. Read all safety warn-
ings, instructions, illustrations and
specifications provided with this power
tool. Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious injury.
b. Operations such as sanding, wire
brushing, polishing are not recom-
mended to be performed with this
power tool. Operations for which the
power tool was not designed may create a
hazard and cause personal injury.
c. Do not use accessories which are not
specifically designed and recom-
mended by the tool manufacturer. Just
because the accessory can be attached
to your power tool, it does not assure safe
operation.
d. The rated speed of the accessory must
be at least equal to the maximum
speed marked on the power tool.
Accessories running faster than their rated
speed can break and fly apart.
e. The outside diameter and the thickness
of your accessory must be within the
capacity rating of your power tool.
Incorrectly sized accessories cannot be
adequately guarded or controlled.
f. Threaded mounting of accessories
must match the grinder spindle thread.
For accessories mounted by flanges,
the arbour hole of the accessory must
fit the locating diameter of the flange.
Accessories that do not match the mount-
ing hardware of the power tool will run out
of balance, vibrate excessively and may
cause loss of control.
g. Do not use a damaged accessory.
Before each use inspect the accessory
such as abrasive wheels for chips and
cracks, backing pad for cracks, tear or
excess wear, wire brush for loose or
cracked wires. If power tool or acces-
sory is dropped, inspect for damage or
install an undamaged accessory. After
inspecting and installing an accessory,
English
5