Installation - Kenwood KVT-725DVD Installations-Handbuch

Installation

Installation for Monitor/Player Unit
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
Installation for Receiver unit
1. Attach the installation brackets 9 to the sides of the
hideaway unit using the sems bolts 7.
2. Use the tapping screw 8 to secure the hideaway unit to the
audio board.
8 English
Firewall or metal support
Accessory 5
Metal mounting strap
(commercially available)
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil
and attach it in place.
Installation brackets
(Accessory 9)
Tapping screw (ø4 × 16 mm)
(Accessory 8)
Sems bolts (M4 × 8 mm)
(Accessory 7)