Installation; Connection - Kenwood KDC-BT49DAB Bedienungsanleitung

Wiring connection
Antenna terminal
DAB antenna jack ( 26)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
White ]
B5
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
B8 Green/black [
Rear/ front/ subwoofer output
Yellow (Battery wire)
Ignition wire
(Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
STEERING WHEEL
Light blue/yellow
REMOTE INPUT
(Steering remote
REMOTE CONT
control wire)
ANT CONT
Blue/White
(Power control
P. CONT
wire/ Antenna
control wire)
Brown
(Mute control wire)
MUTE
ISO connectors
When connecting to an external
amplifier, connect its ground
MIC (microphone input
wire to the car's chassis to avoid
terminal) ( 11)
damaging the unit.
Part list for

installation

(A) Faceplate
(B) Trim plate
To the steering wheel
remote control adapter
To the power control
(C) Mounting sleeve
terminal when using the
optional power amplifier
or to the antenna control
terminal in the vehicle
(D) Wiring harness
To connect the Kenwood
navigation system, refer
your navigations manual
(E) Extraction key
25
ENGLISH