Safety Instructions - LaserLiner VideoScope One Bedienungsanleitung

– The unit is not suitable for taking measurements close to dangerous
voltages. Therefore always make sure that conductive parts are at zero
potential when carrying out measurements in the vicinity of electrical
systems. Safe isolation from the power supply and precautions to prevent
systems being switched on again must be ensured by implementing suitable
measures.

Safety instructions

Using artificial, optical emission (OStrV)
LED outlet
– The device works with LEDs of risk group RG 0 (exempt, no risk)
in accordance with the latest versions of applicable standards relating
to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable
conditions, the accessible radiation of the LEDs is safe for the human eye
and skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
VideoScope One
09
EN