Fakir LEXUS Benutzerhandbuch Seite 21

• Cordless Trimming
• Charge according to directions. Unplug Trimmer from outlet and remove cord.
• Slide ON/OFF switch ON to begin trimming.
• When finished, turn Trimmer OFF.
Trimming
• Always comb the beard and/or moustache with a fine comb before you start trimming.
• If you are trimming for the first time, be careful. Do not move the Trimmer too fast.
Make smooth and gentle movements.
• Make sure that the Trimmer is fully charged before you start trimming.
• Beard Trimming Comb must be on Trimmer to use the Zoom Lock.
• Turn the Zoom Lock to the desired trimming length setting (see table). The setting is
indicated in the center of the adjustment ring (fig. 4).
If you are trimming for the first time, start by using the comb at the maximum trimming
length setting (#10) to prevent accidentally trimming hairs too short. As you become
familiar with the settings, adjust ring to desired trimming length. Zoom Lock will "click"
into position at each setting.
NOTE!
Since all hairs do not grow in the same direction, you may want to try different
trimming positions (i.e., upwards, downwards, or across). Practice is best for optimum
results.
Settings
• Switch the Trimmer ON.
• To trim in the most effective way, move the Trimmer against
the direction of hair growth. Make sure the surface of the comb
always stays in contact with the skin (fig. 5).
Hair Length
Settings
after Trimming
21
EN
Hair Length
after Trimming