Weidmuller UCV/AR Bedienungsanleitung Seite 22

Connections
All manuals and user guides at all-guides.com
Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-
stranded wires (do not solder).
Use 12-28 AWG Cu Wire rated for temperatures above 70 °C Only,
tighten to . lb-In.
For effective protection from electromagnetic noise, all signal cables
must be shielded, or located on conductive trays or in conduits.
Terminal Signal
1
24 V DC (out)
2 Current +
3 Common −
4 Voltage +
5
Not used
6
7
Link to change the set-up
8
9 Neutral (−)
10 Live (+)
11 Channel one
12 Channel two
13 Common
14 Output +
15 Current −
16 Voltage −
Case Earthing is via a stud on lower side of case
18
Input signals
Security Link
Power supply
Alarm outputs
Analogue outputs