Inhaltsverzeichnis
Werbung
2.3 Repair/Accessories
Eventual repair, modification or additions to the PPE generally have to be carried out exclusively by the manufacturer.
2.4 Training/Instructions
Personal protective equipment against falls from a height must only be used by persons, who have been instructed according to the
valid national working conditions act.
We are pleased to inform you about training for INSTRUCTIONS or COMPETENT PERSONS.
3
Period of use
The operating life of this safety product essentially depends on the type and frequency of use as well as on the conditions of use,
diligent care and storage and therefore can not generally be defined. Products made of chemical fibres (e.g.: polyamid, polyester,
aramid) are subject to certain ageing even if they are not used, especially depending on the intensity of ultraviolet rays as well as on
the climatic environmental influences.
Maximum longevity of 12 years
The maximum longevity of Haberkorn products in synthetic and textile material is 12 years from the date of production under optimal
storage conditions and without being used.
Maximum operating life of 10 years
The maximum operating life with occasional, proper use without visible wear and tear under optimal storage conditions is 10 years from
the date of first use.
Storage period of 2 years
The storage period before first use and without reducing the maximum operating life is 2 years from the date of production.
ATTENTION: Provided that all instructions on safe handling and storage are observed, the following, non-binding
indications on the lifespan can be recommended:
•
Intensive, daily use
•
Regular use throughout the year
•
Regular seasonal use
•
Occasional use (once a month)
•
Sporadic use
Work positioning belts, full body harness, work seat harnesses:
With normal use and observation of these instructions for use, the realistic application period is 6 to 8 years. Basis: BGR 198 - Rules
for safety and health at work by the Employer's Liability Insurance Association (BG-rules)/ DE.
Metal fittings such as buckles, karabiners, etc.:
The life of metal fittings is generally unlimited; however a periodic inspection of metal fittings must be carried out regarding damage,
distortion and wear as well as functioning.
When different materials are used in one product, the period of use is subject to the most sensitive materials.
Extreme conditions of use can cause the elimination of a product after only using once (type and intensity of use, field of application,
aggressive environment, sharp edges, extreme temperatures, chemical substances etc.).
A PFPE must definitely be discarded:
• in case of damage to supporting parts, which are essential for safety, such as webbings and seams (tears, cuts or other)
• in case of damage to plastic and/or metal fittings
• in case of strain by a fall or heavy load
• after the application period has elapsed
• if a product does not seem safe or reliable anymore
• if the product is outdated and does not comply with the technical standards anymore (modification of legal regulations,
norms and technical rules, incompatibility with other equipment etc.)
• if the history of use is unknown or incomplete (test manual)
• if the identification of the product does not exist or if it is illegible or missing (even partly)
• if the instructions for use/test manual of the product are missing (because product history can not be tracked!)
• See also item: 2) Regulations for the owner of the equipment
If the visual inspection carried out by the user, holder of the equipment or the competent person results in complaint or if the PPE has
elapsed, it has to be discarded. The elimination has to be made in such a way that reuse in action can absolutely be excluded (e.g. by
cutting and disposing of belts, fittings etc.).
In case of frequent use, intensive wear or extreme environmental influences, the allowed period of use becomes shorter. The decision
on the operational capability of the device is up to the responsible COMPETENT PERSON within the prescribed periodic inspection.
4
Liability (complementing point Caution)
Neither the A. Haberkorn & Co GmbH nor its sales partners assume any liability for accidents in relation to the present product and
consequential personal and/or material damage, especially in cases of misuse and/or incorrect use. In all cases the users are
responsible for risks taken.
5
Notes for use
If it is not possible to use platforms, suitable barriers and similar security facilities during temporary work at heights or for any technical
reasons, personal protective equipment can avoid a fall from a height when the respective activity is carried out correctly. The protective
equipment described here is either intended to secure the user at the place of work (positioning function) or to avoid that the user
can reach a place from which he/she can fall (restraining function). Please note that this personal protective equipment does not
comply with the requirements for fall arrest systems, e.g. according to EN363, due to its design and properties/quality.
If it is not possible to store the instructions for use together with the product due to the special use of the product in the field of fire
fighting and the particular storage places in the fire fighting ambiance (in emergency vehicles), the instructions for use must be
8
- less than 1 year
- 1 year to 2 years
- 2 to 3 years
- 3 to 4 years
- 5 to 7 years
Werbung
Inhaltsverzeichnis
