Lacor 69373 Gebrauchs- Und Instandhaltungsanleitung Seite 55

2.- Press the ON/OFF switch to switch on the machine and the motor will start to rotate.
NOTE: The ingredients must be cut beforehand, bearing in mind the dimensions of the input
hole of the product. NEVER add ingredients with thick peels or items with stones or large seeds
that are difficult to remove. The rotation axis can get stuck and cause an unfixable breakage
in the motor.
3.- Start to add the food through the input hole (2) and use the pusher (13) in the event that it is
not sucked into the pressing block.
NOTE: The blade located inside the inlet helps to cut the food inserted. For safety reasons,
always use the pusher supplied.
4.- The waste will be deposited directly into the waste cup (6).
5.- Open the anti-drip lid (5) so that the juice pours into the juices cup (7).
6.-
If you wish to change cup or block the juice outlet, close the lid by moving it inwards
7.- If any of the ingredients are blocked , press the ON/OFF switch to REVERSE mode and the
motor will start to work backwards to unblock
8.- To avoid accumulating the pulp in the juice container it is recommended to fill (with the motor
running) the container with hot water. This water will remove the leftover pulp from the filter
and the juice container. Remember to have another container other than the one supplied, in
order to collect this water.
ICE CREAM AND FOOD PROCESSING FUNCTION
Use the accessory provided to prepare ice creams and process all types of food. Make all kinds
of ice creams with different textures, natural burgers, vegetable pies, etc.
1.- Add the ingredients through the input hole (2) and use the pusher (13) if they are not sucked
in by the pressing block.
NOTE: To make ice cream, it is recommended to take the fruit out of the freezer 15 minutes
before starting the preparation
NOTE: The ingredients will be pressed but not filtered, and so special care must be taken with
the food added.
itself.
55