Denon ADV-1000 Bedienungsanleitung Seite 44

ENGLISH
(4) "AUDIO SETUP" is selected
2,3,4
1
See page 41.
2
3
Use the and cursor buttons to select the
desired setting, then press the ENTER button.
• DIGITAL OUT
Use this to select the digital output's signal
format.
• LPCM SELECT (96 kHz / 48 kHz)
Use this to set the digital audio output when
playing DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the and cursor buttons to select
"DVD SETUP MENU", then press the ENTER
button.
• The screen returns to as it was in step 2.
4
Use the and cursor buttons to select the
desired setting, then press the ENTER button.
2 When "DIGITAL OUT" is selected.
• NORMAL (Factory default)
Make the selection when playing back in
surround playback a DVD that has been
recorded with Dolby Digital or DTS on this unit.
The Dolby Digital or DTS digital signal is also
output from the digital output jacks.
• PCM
DVDs that were recorded in Dolby Digital are
converted to linear PCM 48 kHz/16 bit (2
channels). Make the selection when making a
digital recording. DVDs recorded with DTS are
not converted and digital recording is not
possible.
To exit the digital out mode
Press the ENTER button, you can go back to
the previous screen.
44
POWER
VCR POWER
TV POWER
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
ENTER
2,3,4
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
T.TONE SDB/TONE SURR.PARA
CH.SELECT
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
1
REMOCON MODE
D I G I TAL OUT
L PCM M SEL ECT
( 9 6 kHz --> 48kHz)
> DVD SETUP MENU
DVD SETUP MENU
Remote control unit
d
ENTER
SELECT :
Remote control unit
D I G I TAL OUT
Remote control unit
d
ENTER
SELECT :
Remote control unit
4
"LPCM SELECT (96 kHz / 48 kHz)" is
2
selected.
• OFF (Factory default)
Make the selection when playing back to a
decoder DVDs that were recorded with this
unit using linear PCM 48 kHz/20/24 bit and 96
kHz modes. Note that DVDs with Copyright
Protection are converted to 48 kHz/16 bits and
played back.
The same signal is output from the digital
output jacks.
• ON (96 kHz Æ 48 kHz)
DVDs that were recorded with linear PCM 48
kHz/20/24 bit and 96 kHz modes are all
converted to 48 kHz/16 bits. Make this
selection at the time of digital recording.
To exit the LPCM select mode
Press the ENTER button, you can go back to
the previous screen.
B
AUDIO SE TUP
NORMA ORMAL
OF F
DEC I S ION: ENTER BUTTON
D I G I TAL OUT B
NORMA L
PCM
DEC I S ION: ENTER BUTTON
LPCM SE L ECT B
OF F
L PCM M SE L ECT
( 9 6 kHz --> 48kHz) ON
Remote control unit
d
ENTER
SELECT : DEC I S ION: ENTER BUTTON
Remote control unit