Denon ADV-1000 Bedienungsanleitung Seite 13

(2) Before setting up the system
• This section describes surround-related setup operations.
For DVD-related setup operations, see page 41.
• The setup operations cannot be performed while discs are playing. Set the stop mode first.
2
CH
2
1 2 3
ON
POWER POWER VCR
CH
OFF 4 5 6
VCR POWER VCR POWER CH
VOL
7 8 9
CLEAR
TV
TV POWER TV POWER
CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
4
ENTER
5
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
3
REMOCON MODE
1 Refer to "CONNECTIONS" (pages 5 to 8) and check
that all connections are correct.
2 Turn on the power.
Press the POWER switch (button).
ON / STANDBY
Light
(green) ON
POWER POWER
Main unit Remote control unit
When pressed, the power turns on and the display lights. The
sound is muted for several seconds, after which the unit
operates normally. When pressed again, the power turns off,
the standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state,
the apparatus is still connected on AC line voltage. Please be
sure to unplug the cord when you leave home for, say, a
vacation.
3 Press the SETUP button.
SETUP
B
SETUP MENU
Remote control
Q U I C K S E T U P
unit
<ADVANCED SETUP
ADVANCED SETUP>
SYSTEM SETUP SYSTEM SETUP
D V D S E T U P D V D S E T U P
> E X I T S E T U P
E X I T S E T U P
SELECT : DEC I S ION: ENTER BUTTON
4
Use the and cursor buttons
on the remote control unit to select
the setting menu.
• There are three types of setup
menus.
Remote control unit
B QUICK SETUP: Select "ROOM SPACE"
"SEATING POSITION".
B SYSTEM SETUP: Detailed settings of the AV
system function
B DVD SETUP: Detailed settings of the DVD function
5 Press the ENTER button to display
ENTER
the setting screen of the respective
menu.
Remote control unit
(3) Quick system settings (to switch between the 2- and 5.1-channel modes)
• The ADV-1000 is preset with Quick System settings for a 5.1-channel surround system using five small speakers.
See "(4) System setting changes" (pages 14 to 16 when using speaker systems other than the ones described below or if you
wish to change the settings.
1 At the setup screen, select "QUICK SETUP", then press
the ENTER button. (See page 13.)
2
Use the and cursor
buttons to select "Room Space",
then use the and cursor
buttons to set the size of the room.
• The set size is displayed in
Remote control unit
yellow.
Q U I C K S E T U P M E N U B
E X I T
R O O M S P A C E R O O M S P A C E : ( 4 . 2 X 4 . 2 m )
S M A L L S M A L L M E D . M E D . L A R G E L A R G E
S E A T I N G P O S I T I O N
C E N T E R B A C K
< S E T U P V A L U E S >
FRONT SMALL SMALL 2.7m
CENTER SMALL SMALL 2.4m
SURROUND SMALL SMALL 2.1m
SUBWOOFER SUBWOOFER YES 2.7m
SELECT : DEC I S ION: ENTER BUTTON
3
Use the and cursor
buttons to select "Seating
Position", then use the and
cursor buttons to
set the size of the position.
Remote control unit
• The set position is displayed in yellow.
B
Q U I C K S E T U P M E N U
E X I T
R O O M S P A C E : ( 4 . 2 X 4 . 2 m ) R O O M S P A C E ( 4 . 2 X 4 . 2 m )
S M A L L S M A L L M E D . M E D . L A R G E
S E A T I N G P O S I T I O N S E A T I N G P O S I T I O N
C E N T E R B A C K
< S E T U P V A L U E S S E T U P V A L U E S >
FRONT SMALL SMALL 2.4m
CENTER SMALL 1.8m
SURROUND SMALL SMALL 2.4m
SUBWOOFER SUBWOOFER YES 2.4m
SELECT : DEC I S ION: ENTER BUTTON
4 Press the ENTER button to enter the
and setting.
• The setup screen reappears.
Remote control unit
5 Press the SETUP button to quit the
setup mode.
You can also quit the setup mode
by using the cursor button at
the setup screen to display "Quit
setup" in yellow then pressing
the ENTER button.
To change the settings
At the setup screen, select "SYSTEM SETUP" from
"<ADVANCED SETUP>".
About the quick system settings
ROOM SPACE:
Set the size of the room in which you are using the
product.
SMALL: 10 ft x 10 ft (3.0 m x 3.0 m)
MED.: 12 ft x 12 ft (4.2 m x 4.2 m)
LARGE: 30 ft x 30 ft (6.0 m x 6.0 m)
SEATING POSITION:
Set whether the seating position is near the center of the
room or towards the back.
CENTER
BACK
Settings:
When "ROOM SPACE" or "SEATING POSITION" is
selected, the distance from the listening position to the
different speakers is displayed automatically.
If the relative distance is very different from the actual
distance (for example if a shorter distance is displayed
for the front speakers than for the center speaker but
actually the opposite is true), set the distance as
described in "ADVANCED SETUP" (page 14).
ENTER
ENGLISH
SETUP
Remote control
unit
13