Security Mode - Lumie Bodyclock Advanced 200 Bedienungsanleitung

All manuals and user guides at all-guides.com
English
15 Setting Sleepsound
Sleepsound is a continuous white noise 'hiss' sound that is
useful to mask outside noises when you want to sleep.
Make sure A is OFF (button depressed).
Press P repeatedly until program message
Immediately press
means the Sleepsound will become quieter with the sunset, falling
silent as the light goes out.
Alternatively press
appears. This means whenever you turn the wake-up on (A ON,
button elevated), the Sleepsound will be heard. The # symbol on
the display shows when Sleepsound is enabled.
To turn the Sleepsound off for just one night ...while the hiss
sound is audible, press A IN and immediately OUT again.
16

Security mode

Allows you to set the Bodyclock Advanced's light to switch on
and off at random between 4pm and 11pm to give the
impression the house is occupied.
A must be OFF (button depressed).
Press P until the program message
Immediately press
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal. The display will now read
Pressing any button will cancel security mode. Remember,
security mode is only set if the display reads
10 | www.lumie.com
(white noise)
-
+
or until
SOUND AUTO
-
+
or until
SOUND PERM
-
+
or until
SECURITY ON
| lumie careline 0845 658 9292
SOUND OFF
appears. This
(sound permanent)
SECURITY OFF
is set.
SECURITY
SECURITY
appears.
appears.
.
.