Security Mode; Demo Mode - Lumie Bodyclock ADVANCED 200 Bedienungsanleitung

BCAI0708 14/8/07
English
16

Security mode

Allows you to set the Bodyclock Advanced's light to switch on and
off at random between 4pm and 11pm to give the impression the
house is occupied.
A must be OFF (button depressed).
Press P until the program message SECURITY OFF appears.
Immediately press + or – until SECURITY ON is set.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.The display will now read SECURITY.
Pressing any button will cancel security mode. Remember, security
mode is only set if the display reads SECURITY.
17

Demo mode

To demonstrate the Bodyclock Advanced's sunrise and sunset
functions continuously, in short 4 minute cycles (rolling
demonstration mode).
A must be OFF (button depressed).
Press + for about 12 seconds until you hear a beep and the program
message reads SUNSET.
To stop the demonstration press + again for about 12 seconds until
you hear 2 beeps and the program message goes blank.
You might want to disable the beeper (see 11) before starting this
mode.
For a demonstration mode in which the Bodyclock Advanced
operates as normal except the sunrise and sunset take only 2
minutes, set FADEUP DEMO (see 9). In this mode press and
hold P then press + briefly to start a sunrise.
10 | www.lumie.com
18:25 Page 10
| lumie careline 0845 658 9292