Lumie Bodyclock Advanced 200 Bedienungsanleitung Seite 7

All manuals and user guides at all-guides.com
English
9 Setting the wake-up speed
The wake-up sequence is pre-set so the sunrise starts 30 minutes
before wake-up time.
To change the speed of the wake-up sequence...
Make sure A is OFF (button depressed).
Press P repeatedly until
) appears on the display.
DEMO
Immediately press
appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
Remember to press A again so that the wake-up is ON (button
elevated).
10 Using snooze
When the beeper sounds, press
light on. The beeper will sound again 9 minutes later.
If you prefer, when the beeper sounds press and hold
the beeper and dim the light. The light will re-illuminate to full
strength over the next 9 minutes then the beeper will sound again.
11 Disabling the back-up beeper
To turn the beeper off at wake-up time when it is sounding,
press A.
The beeper is pre-set to ON, to change this...
A must be OFF (button depressed).
Press P repeatedly until the program message reads
FADE UP 30
-
+
or until the desired wake-up speed
-
once to turn it off and leave the
www.lumie.com
(or or
60 90
| lumie careline 0845 658 9292
or or
15
-
to turn off
.
BEEP ON
| 7