FITFIU FITNESS BESP-500 Betriebsanleitung Seite 42

ASSEMBLY
STEP 1
1. Attach the front stabiliser (2) to the main frame (1) with 2 bolts (4), 2 flat washers (3). Repeat the previous step
to install the rear stabiliser (5) to the main frame (1). You can tighten the bolts with the Allen key.
STEP 2
1. Screw the right pedal "R" (6R) and the left pedal "L" (6L) to the right and left crank respectively (21/22). Secure
them with the two lock nuts (47/48) and tighten them with a spanner.
NOTE: The right pedal must be screwed clockwise and the left pedal counterclockwise.
26
5
24
6L
1
2
6R
42
4
3
1