Inspection - YASKAWA SGD7S-OSB01A Bedienungsanleitung

Further alarms and causes that can occur from the time the safety module is
parameterised with the Yaskawa software "Advanced Safety Module Parameter
Editor" can be found in the product manual.
Name
Advanced Safety Module for Sigma-7 SERVOPACKs
SGD7S- DA0 8
Be sure to always use the most recent version of this manual.
A description of the alarms generated by the SERVOPACK and methods for clearing
the alarms can be found in the manual for your SERVOPACK.
Name
Sigma-7-Series AC Servo Drive Sigma-7S SERVOPACK with
400 V-Input Power and EtherCAT
Product Manual
Be sure to always use the most recent version of this manual.
7

Inspection

For inspections of the safety module, follow the inspection procedures in the table below at least
once every year.
Item Frequency
Exterior At least once
a year
Loose screws
26 YASKAWA EUROPE TOMP YEUOS7S 01A – Sigma-7 Series Advanced Safety Module – Instruction Manual
F91, 400 V, Product Manual
(CoE) Communications
®
Procedure
Check for dust, dirt, and oil
on surfaces.
Check for loose terminal
block and connector
screws.
Manual number
SIEP YEUOS7S 01
Manual number
SIEP S800002 30
Remedy
Clean with a cloth.
Tighten any loose screws.