Package Contents - Niceboy PARTY BOSS 200W Bedienungsanleitung

RECORDING
When wireless or wired microphone or musical instrument is connected via the microphone
inputs, you can record the singing / musical instrument to a USB drive or SD memory card.
The storage medium must contain at least one mp3 or WAV audio file in order to be detected
by the device.
1. Turn the speaker off and connect other instruments to the MIC.IN or GT.IN inputs.
2. Turn the speaker on.
3. Insert a USB drive or SD card into the appropriate USB or SD CARD slots.
4. The speaker will switch to the appropriate storage media mode.
5. Briefly press the REC button to start recording your audio track. The recording is indicated
on the display by REC.
6. To end the recording, press the REC button briefly again.
7. The speaker will automatically play the recorded audio track.
8. To delete a track, press and hold the REC button.
9. Use the PREV and NEXT buttons to switch between the recorded tracks.

PACKAGE CONTENTS

Niceboy PARTY Boss 200W speaker
Power cable
Wireless microphone
Remote control
3.5 mm jack cable
2x AA batteries
2x AAA batteries
Operating instructions
PARAMETERS
Bluetooth version:
Degree of protection:
RMS performance:
Power supply:
Battery:
Charging time until charged:
Battery life:
Woofer:
Frequency range:
Impedance:
Sensitivity:
Tweeter:
Frequency range:
Impedance:
Sensitivity:
Microphone:
Frequency:
Impedance:
Sensitivity:
This product complies with all the basic requirements of relevant EU directives.
5.0
IPX4
200W
100–240V, 60/50Hz
4A 12V
4 hours
8 hours
2 x 8"
20 Hz-6 kHz
3Ω, ± 10%
88db, ±2dB
2x2"
40Hz - 20kHZ
4Ω, ±15%
85dB,±3dB
wireless, directional
40 Hz- 15 kHz
10kΩ / 1kHz
5dB
18