Beurer pearl OT 80 Gebrauchsanleitung Seite 22

Usage with stripholder
1 Slide the protective cover all the way back
2 Place the required hormone strip (LH or FSH) into the col-
our-coded strip slot of the stripholder
The pregnancy tests can be inserted in both the
LH and in the FSH slot.
3 Insert the hormone strips fully up to the "Max" line Ensure
that the "Max" marking on the hormone strips aligns with
the stripholder
4 Slide the protective cover all the way forward again
5 Hold only the absorbent tip of the hor-
mone strip facing downward in your urine
stream for 3 seconds Make sure that you
hold the strips completely in the urine
stream up to the "Max" marking; other-
wise, not enough liquid will hit the strips
and they cannot be evaluated In doing
so, ensure that the arrow marking on the
stripholder does not become wet
Clean the stripholder after each use (for more
information see chapter on cleaning)
Usage with urine container
1 Collect the urine sample in a clean and dry
container
2 Dip the absorbent tip of the hormone strip
vertically up to the "Max" marking into the
urine sample for 5 seconds Make sure that
the strips are fully immersed in the urine
sample up to the "Max" marking; otherwise,
they will not come into contact with enough
81667 München, Germany
liquid and they cannot be evaluated How-
ever, the "Max" marking must not be exceeded
81667 München, Germany
22
2°C
1.
5
sek.
5
sek.
2.
2.
10-15
min.
10-15
min.
Colorimetrix GmbH,
Michael-Huber-Weg 30
Colorimetrix GmbH,
Michael-Huber-Weg 30
30°C
3
sek.
3
sek.
1
5
sek.
2