Package Contents - Niceboy PILOT Q2 WIFI Anleitung

CONNECTING THE CAMERA TO A PC
Connect a data USB cable to the miniUSB port on the camera (6) and to
the USB port in the PC. Once connected to a PC, the following options will
become available:
1. Storage: you can manage files stored on the memory card (the came-
ra acts as an external drive)
2. PC camera: can be used as a camera in programmes that allow the
connection of an external camera (the microphone cannot be used).
3. Charging: the camera will recharge.
Attention: supported systems include Windows 8 and later and MacOS 11
and later.
CONNECTING THE CAMERA TO A PHONE VIA WIFI
Install the GoPlus Cam application (for free) on your phone (available in
the Appstore for iOS and GooglePlay for Android). Do not start the appli-
cation right after installing it and follow these instructions:
1. Turn on the Wi-Fi by long-pressing button (9) on the camera.
2. Open the Wi-Fi settings on your mobile phone and connect to the
camera network (name: PILOT Q2, password: 12345678).
3. Once connected to the network, you can launch the application and
start controlling the camera from your phone.
4. You can turn off the Wi-Fi on the camera by long-pressing button (9).
Attention: before running the application, enable all the permissions for
the application in the phone's settings, turn off „data connection" on the
mobile phone and leave only Wi-Fi turned on. The application can only
be installed on mobile phones with iOS 8.0 and later and on devices with
Android 6.0 and later.

PACKAGE CONTENTS

Niceboy PILOT Q2 WIFI car camera
Adhesive mount
USB car adapter for charging
Manual
18