Niceboy PILOT Q2 WIFI Anleitung Seite 16

CAMERA SETTINGS
G-Sensor: G-Sensor intensity setting. The G-Sensor detects vibrations
and automatically starts emergency recording function for the recorded
video (prevents the video from being erased).
Parking Mode: when the function is on, the camera switches on and
starts recording when the G-Sensor detects vibrations (the G-Sensor
must be active).
Frequency: frequency setting (50 Hz for Europe, 60 Hz for the USA).
Screensaver: sets the time after which the screen turns off (does not
affect video recording).
Automatic Shutdown: sets the camera to switch off automatically when
idle (camera is not recording video).
Language: camera menu language setting.
Acoustic Signals: turns button click sound and camera on/off sounds
on and off.
Date/Time: date and time setting.
WIFI SSID: Wi-Fi name setting
WIFI Password: Wi-Fi password setting
Format: erases all data on the memory card
Default Settings: resets the camera to default settings.
Version: camera firmware information.
PHOTO MODE SETTINGS
Photo Resolution: sets the resolution of the photos you take.
Exposure: exposure compensation settings. The higher the positive
value, the brighter the photo; the lower the negative value, the darker
the photo.
Quality: settings for the quality of the photos you take.
Continuous Shot: turns the function to take several photos in quick
succession on/off.
Sharpness: settings for the sharpness of the photos you take.
ISO: ISO value setting.
Stabilization: turns digital image stabilization on/off.
White Balance: sets and adjusts the colour temperature of the photo.
ADHESIVE MOUNT
Place the mount into the slot (14). Remove the film protecting the
adhesive surface of the mount. Attach the mount to the car window using
the adhesive surface. To tilt or rotate the camera, loosen the nut in the
mount to adjust its position. Then retighten the nut so that the mount
holds in place. To remove the camera from the mount, press the clip on
the mount and slide the camera to the left.
16