Microsd Card - Niceboy PILOT Q2 WIFI Anleitung

Attention: only place the adhesive camera mount onto glass that has been
thoroughly cleaned (degreased) and is completely dry. The best adhesion is
achieved at temperatures around 20 °C.

MICROSD CARD

Choose a brand-name microSD card (UHS-I U1 and faster) with maximum
capacity of 32 GB. Before using it in the camera for the first time, it is
necessary to format the memory card on a PC to FAT32 file system
(formatting the memory card will erase all data on the card). Insert the
memory card into the camera with the PINs facing towards the camera
screen.
Recommendation: regularly format the memory card on a PC to avoid
video writing problems. If the camera is used on a daily basis, format the
card at least once a month.
More information about the use of the card and its formatting will be
provided by the manufacturer of the card.
SWITCHING THE CAMERA ON/OFF AUTOMATICALLY
As soon as the camera detects charging current, it will automatically
switch on and start recording (a memory card must be inserted). When
the camera gets disconnected from the power source, it will stop recor-
ding and will switch off.
CAMERA POWER SUPPLY
The camera can be connected to a power source via a car adapter
(included with the product), via a USB cable connected to a PC or via a
charging adapter from a mobile phone. The camera can also be charged
from a power bank.
USING THE CAMERA ON BATTERY POWER (WITHOUT POWER
SUPPLY)
The camera has a backup battery, which is primarily intended for parking
mode. The camera is designed for recording with a constant connection
to power supply. When using the camera on battery power, the battery
must be fully charged before use. Battery life without a connected power
source is about 25 minutes with the screen and Wi-Fi turned off. If you
wish to use the camera while disconnected from a power source, it must
always only be turned on using button (7) after it has been disconnected
from a power source.
17