Modster T-28 Trojan Betriebsanleitung Seite 8

User Manual
Digital Trims
Digital trims allow to adjust the centered position
of rudder or elevator surfaces.
Each time when a trimmer is moved, the servo
output will change one step. If the trimmer is
held, the output will scroll in that direction until
the trimmer is released or the
output reaches its end. When you hear a short
"beep" sound, it means the trimmer is
centered.
Channels Reactions Checking
Transmitter
Operaton
Place your plane in a neutral position, follow below steps to check the channels reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as shown in the
left diagram(left throttle for example). Swing your plane to check if all servo surfaces react correctly
as shown in the right diagram.
One-key Aerobatics Instruction
The one-key aerobatics feature allows beginner pilot to perform
aerobatic actions by simply pressing the button on transmitter.
During flight, under gyro control mode, press the one-key
aerobatics button, the transmitter will beep several times. During
the beeping, simply move the aileron stick to either direction for
auto-roll. Or move the elevator stick to either direction for auto-
flip.
8
Reaction
MODSTER T-28 Trojan
Swing The
Gyro Reaction
Plane
One-key Aerobatics
www.modster.at