Flight Checklist - Modster T-28 Trojan Betriebsanleitung

User Manual
Propeller Saver Instruction
Base
Upper
Part
Motor
Shaft
Base

Flight Checklist

NOTE: This checklist is NOT intended to replace the content included in this instruction manual.
Althought it can be used as a quick start guide, we strongly suggest that read all though the
manual completely before proceeding.
- Always turn the transmitter on first.
- Ensure the throttle control stick is at bottom position before connecting the battery.
- Check all control functions for correct functionality before the flight.
- Fly the model(hand-launch or take off from a flat/level surface).
- Land the model(on a flat/level surface).
- Unplug the battery from ESC.
- Always turn off the transmitter last.
- Remove the battery from the model.
10
Upper
Part
Spinner
Screw
Propeller
MODSTER T-28 Trojan
The propeller saver keeps the propeller
from damage, and prevent the electronic
components from over current.
When the airplane hits any obstacle, the
propeller will loose from the base.
To install the propeller back to the base, insert
the upper part centerly through the motor shaft,
and hearing a "click" sound to ensure it is
secured.
Follow below steps to replace broken propeller
and shaft adaptor. You will need help of a
Philips screw driver and pliers(not included).
1. Take off the spinner and propeller by loosen
the screw with a Philips screw driver.
2. Take off the shaft adaptor carefully. If it is too
tight, use pliers to help.
3. Replace any part broken.
4. Install all parts back by inverted orders to
finish the replacement.
www.modster.at