Program Change - Compex MINI Bedienungsanleitung

EN
OPERATING INSTRUCTION
STEP 4 - Press the "ON/OFF" to turn on the power
Press and release the ON/OFF button to turn on the device, indicated by the
yellow LED indicators on and beeping once (0.5 second).
STEP 5 - Select one of the stimulation modes
After the device is on, press and release the ON/OFF button to change the
6 programs: The flashing/beeping times of LED indicator represent the cor-
responding programs (0.2s per beeping). For example, 3 timers of flashing/
beeping mean Program 3; 6 timers of flashing/ beeping mean Program 6.
STEP 6 - Adjust the stimulation intensity
Press and release the + or – button to increase or decrease the intensity by
one level (up to 299 levels), indicated by the LED flashing once and beeping
once (0.2s per beeping); holding the + or – button for 1 second could increase
or decrease the intensity by 10 levels, indicated by the LED flashing twice and
beeping twice (0.2s per beeping). After the above mode, time, and intensity
are set up, the stimulation provided by the device will last until the device
until the program is completed.
STEP 7 - Press the "ON/OFF" to turn off the power after done
Hold the ON/OFF button for 1 second to turn off the device, indicated by the
three LED indicators off and beeping twice (0.5s per beeping).
Note: When not in use, store the device and accessory in a cool place, out of
direct sunlight.
18
ON / OFF

Program change

Intensity change
ON / OFF