Herunterladen Inhalt Inhalt Diese Seite drucken

Storage; Cleaning And Care; Troubleshooting - Qlima PGF 1211 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für PGF 1211:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8

STORAGE

Make sure the heater is in off position
Always close the valve of the gas cylinder after use or in case of a disturbance.
Disconnect the gas container from the gas heater.
Store the gas container in a well-ventilated room. Position it far away from
inflammable, explosive or hot materials and preferably not in the home. In addi-
tion it should never be stored in the basement or attic.
Cylinder must be stored out of the reach of children.
Disconnected cylinder must have threaded valve plugs tightly installed and must
not be stored in garage or any other enclosed area. Only store in ventilated
area!
Storage of heater indoors is permissible only if the cylinder is disconnected and
removed from the heater.
Check the tightness of the connections of the gas line supply (gas cylinder valve
/ regulator, regulator/hose, hose/appliance inlet). If you suspect a damage, have
it changed by your gas dealer.
Never store liquid gas cylinder in a sub-terrain, or at places without adequate air
ventilation.

CLEANING AND CARE

Warning: Make sure the heaer is in off position and is cool!
Warning: Do not clean heater with cleaners that are combustible or corrosive.
Wipe off powder coated surfaces with soft, moist rag and soap water.
Remove debris, spider and insect nests from ventilation opening of the cylinder
enclosure, control compartment, burner and circulation air passageways of the
heater with heavy duty pipe cleaner or compressed air to keep appliance clean
and safe for use.
Never clear ports or other openings with toothPic.ks or other article that will
break and block the ports.
If carbon deposits develop, remove the reflector and flame screen and clean
them with soap water.
Do not paint the flame screen, control panel or reflector.
Cover the burner unit with the optional supplied protective cover when the
heater is not in use. Wait until the heater is cool before covering.
In a salt-air environment, such as near an ocean, corrosion occurs more quickly
than normal. Check frequently for corroded areas and repair them promptly.

TROUBLESHOOTING

Review these tips first and you may not need to call for service.
4
71

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis