Rcp12-E Wireless Room Control Unit - Resol VBus / EnOcean Montage, Anschluss, Installation

15.3 RCP12-E wireless room control unit

The RCP12-E is used for measuring the room tempera-
ture with a Pt1000 measuring element and allows adjust-
ment of the heating curve of the controller from the li-
ving area. With the additional operating mode switch, the
operating mode can be switched quickly from automatic
mode e.g. to night operation. The values are transmitted
via radio (EnOcean) and then transferred to the control-
ler by the VBus /EnOcean interface adapter.
®
• More living comfort – easy adjustment of the desired room temperature
• Ideal for retrofitting, no cable has to be laid
• Power supply via an integrated solar cell or optionally via battery
After the wireless room control unit has been taught-in, it is available as a tempe-
rature sensor input, remote control and operating mode switch on the controller.
Note:
For more detailed information, see the manual of the wireless room
control unit!
23