Replacing The Primary Filter; Cleaning Outer Surfaces - Abicor Binzel xFUME FLEX Betriebsanleitung

9 Maintenance and cleaning

9.3 Replacing the primary filter

The primary filter cannot be cleaned; it must be completely replaced.
Cleaning the primary filter with compressed air or a hammer is not permitted.

9.4 Cleaning outer surfaces

Clean outer surfaces with a suitable industrial vacuum cleaner (dust class H in accordance with
1
DIN EN 60335-2-69 Appendix AA) or a damp cloth.
Dispose of cleaning residues/cloths in accordance with local regulations.
2
EN - 18
Use the On/Off switch to switch the device to Off.
1
 Fig. 2 Assembly and use on page EN-9
Pull out the mains plug.
2
Unlock and open the service door using a square
3
wrench.
Remove the primary filter.
4
Dispose of the primary filter in accordance with
5
local regulations.
 12 Disposal on page EN-21
Insert the primary filter.
6
Close the service door and lock it using
7
a square wrench.
xFUME FLEX