Registering User Rfid Card; Vehicle Connection & Charging; Socket Equipped Model; Vehicle Connection - VESTEL EVC04 Serie Bedienungsanleitung

1.2.1 - REGISTERING USER RFID CARD

For standalone variants, the master RFID card is already registered to your charger. If you want to
switch to RFID authorised mode and register user RFID cards to the charging station, first you need
to tap the master RFID card to your charging station when the charging cable is not connected. After
tapping master RFID card, indication LED starts to blink blue for 60 seconds. You can add/delete
your user RFID card in this period. If you do not make any configuration in 60 seconds, charging
station exits from configuration mode and returns to its previous mode. You need to repeat this
procedure for each user RFID card addition/deletion.
Note: If a box is connected via OCPP with a backend, the RFID cards could only be used if the RFID-Tag
is known in the backend. The users having RFID authorised charging station should inform E.ON Drive
customer support with their RFID card numbers during registeration for online charging services.
1.2.2 - VEHICLE CONNECTION & CHARGING

1.2.2.1 - SOCKET EQUIPPED MODEL

1.2.2.1.1 - VEHICLE CONNECTION & CHARGING
Model Without Display
1 - Ensure that your vehicle and the station is
ready for charging.
2 - Insert the charging plug to the vehicle
inlet and charging station socket outlet.
No LED Indication
IB v7.3.0 2021
No LED Indication
© 2021 Vestel - All rights reserved
Model With Display
1 - Ensure that your vehicle and the station is
ready for charging.
No LED Indication
2 - Insert the charging plug to the vehicle
inlet and charging station socket outlet.
No LED Indication
English - 19