Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical specifications and data:
Min. edge distance (base-material edge
to fastener)
Min. distance (between fasteners)
Min. base material thickness
4
Technical data
4.1
Product properties
Weight (fastening tool)
Dimensions
Length (fastener)
Recommended maximum fasten-
ing rate
Max. contact pressure
Compression stroke
Ambient temperature (storage and
use)
4.2
Noise and vibration information
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and can be used to compare fastening tools with each other. They can also be used
for a preliminary assessment of exposure. The data given represent the main applications of the fastening
tool. However, if the fastening tool is used for different applications, with different accessories or is poorly
maintained, the data may vary. This can significantly increase exposure over the total working period. An
estimation of the level of exposure should also take into account the periods of time when the fastening
tool is not actually in use. This can significantly reduce exposure over the total working period. Prescribe
additional safety measures to protect the operator from the effects of noise and/or vibration, such as:
Maintenance of the fastening tool and its additional equipment or accessories, keeping the operator's hands
warm, organization of work procedures.
The noise values listed were determined under the following conditions:
Noise information conditions
cartridge
Energy setting
Application
Noise information in accordance with EN 15895
Sound power level (LWA)
Emission sound pressure level (LpA)
Peak sound pressure emission level (LpC)
*2338162*
≥ 10 mm
(≥ 0.4 in)
≥ 20 mm
(≥ 0.8 in)
4 mm
(0.2 in)
Follow the instructions in the operating instructions of the
fastener!
DX 450-FA
3.1 kg
(6.8 lb)
355 mm × 101 mm × 352 mm
(14.0 in × 4.0 in × 13.9 in)
14 mm
(0.6 in)
450 fastener driving opera-
tions/h
100 N ... 125 N
(22 lb
... 28 lb
)
f
f
17 mm
(0.7 in)
−15 ℃ ... 50 ℃
(5 ℉ ... 122 ℉)
Caliber 6.8/11 red
3
Fastening sheet metal (1.5 mm thick) to steel with X-R 14 P8
2338162
Fastening accessories
to steel
DX 450-USS
3.16 kg
(6.97 lb)
355 mm × 101 mm × 352 mm
(14.0 in × 4.0 in × 13.9 in)
14 mm
(0.6 in)
450 fastener driving opera-
tions/h
100 N ... 125 N
(22 lb
... 28 lb
)
f
f
17 mm
(0.7 in)
−15 ℃ ... 50 ℃
(5 ℉ ... 122 ℉)
113 ±2 dB(A)
110 ±2 dB(A)
141 ±2 dB(A)
English
23
Werbung
Inhaltsverzeichnis
