Niceboy PARTY BOY 100W Benutzerhandbuch Seite 9

BLUETOOTH MODE
1. The speaker is automatically set to Bluetooth mode after being switched on. If the speaker is in a
different mode, it is necessary to actívate the Bluetooth mode by briefly pressing the MODE button.
The Bluetooth pairing mode is indicated on the display by a flashing word BLUE.
2. Activate Bluetooth on your device. Select "Niceboy PARTY BOY 100W" in the list of available devices.
3. The device will connect to the loudspeaker. A successful pairing is announced by an acoustic prompt
and the word BLUE is permanently lit on the display.
4. After switching it on again, the speaker automatically connects to the last paired device.
To disconnect from the paired device, press and hold the PLAY button (3).
5. Use your paired device or speaker buttons to play music.
PLAYBACK
To start or pause a track, briefly press the button (3). To control the volume,
either briefly press or press and hold buttons (22) and (23). By briefly pressing buttons (2) and (4) you
can skip to the next or previous track.
AUX MODE
1. Insert the 3.5mm jack cable into the audio input (14) and the speaker will automatically
switch to the appropriate mode.
2. Use the device to which you have connected the speaker to control the music being played.
To control the volume of the speaker, press and hold buttons (4) and (6). Press the button (3)
to either mute or amplify the speaker.
TWS FUNCTION
Turn Bluetooth off on your device .
The two "Niceboy PARTY BOY 100W" speakers must be in Bluetooth pairing mode. Press the TWS button
(5) on any of the speakers. The selected speaker will automatically start searching for the other one;
icons BLUE and TWS flash on the display. After a successful connection, the TWS icon will stop flashing
on the LED screen of the main speaker and only the icon BLUE will remain displayed.
Activate Bluetooth on your device. Select "Niceboy PARTY Boy 100W" in the list of available devices. The
device will connect to the speaker. A successful pairing is announced by an acoustic prompt and the
word BLUE is permanently lit on the display. The music will then play on both speakers simultaneously
To disconnect the speakers, press the TWS button (5) on either of the two speakers. You can clear the
TWS pairing memory by long pressing the same button.
EQUALIZER
The default mode is the default equalizer setting. Briefly press the EQ button (20) to switch to Bass 1 or
Bass 2. mode. Press again to switch back to the standard mode.
USB MODE
Insert a USB flash drive into the USB slot (9) and press the M button (6) to switch to the USB mode.
To start or pause a track, briefly press the button (3). To control the volume, either briefly press or
press and hold buttons (22) and (23). By briefly pressing buttons (2) and (4) you can skip to the next or
previous track.
ILLUMINATION MODES
Briefly press the button (21) to select between 5 illumination settings + switch them off.
MICROPHONE AND INSTRUMENTS
The speaker must be turned off before connecting a microphone or musical instrument.
Connect a microphone to the input (12), guitar, or other instrument to the input (13), and turn the
speaker on. Switch the supplied microphone to the ON position. Control the microphone volume with
buttons (15) and (16), the instrument volume with buttons (17) and (18). For both inputs, the ECHO
effect can be adjusted with buttons (7) and (8).
9