Numark DJ iO Kurzanleitung Seite 6

TRAKTOR
If you are using the DJ|iO with Native Instruments' Traktor or Traktor LE software applications, please see the
example and instructions below for information on routing your audio outputs to take full advantage of cueing and
monitoring.
1. In Traktor, click on Preferences.
2. Choose Audio Setup and click on
the Soundcard tab.
3. Next, under the Audio Device pull-
down menu, select Numark USB
Audio Device.
4. Then click on the Output Routing
tab.
5. Lastly, you can
outputs you would like to use for
your Master and Monitor channels
from the pull-down menu on the
bottom. Since the Headphone
output on the DJ|iO is tied to the
Output 2 stereo RCA pair, we
recommend using the Output 1 pair
as your Master channel and the
Output 2 pair as your Monitor channel.
Additional Information: You may also wish to send each virtual "deck" independently to each output pair on the
DJ|iO for use with an external mixer. To do so, please select External as the Mixer Mode in the Output Routing
tab. You will then be able to decide which deck is being sent to which output pair.
choose which
6