Belden Hirschmann RSPE Referenzhandbuch Seite 1178

Tab. 84:
Byte Content
15 Not used
16 Not used
17 Connection
Tab. 85:
Byte Content
0 Report port error
1 Report connection
error
2 Transmission rate
too high
3 Port on
4 Link status
5 Bit rate
6 Duplex
7 Autonegotiation
UM Config RSPE
Release 8.7.02 07/2021
Gerätestatus
Access
ro
Port-Status/Port-Parameter
Access
rw
rw
rw
rw
ro
ro
ro
ro
Value Meaning
0
1
2
0
1
2
0 Unavailable
1 OK
2 Connection failure.
Value Meaning
0 Do not send alarm
1 When one of the following alarm reasons occurs,
send an alarm.
0 Do not send alarm
1 Send alarm if the connection has failed.
0 Do not send alarm
1 Send alarm if the threshold value for the
temperature has been exceeded.
0 Unavailable
1 Switched on
2 Switched off
0 Unavailable
1 Connection exists
2 Connection interrupted
0 Unavailable
1 Unknown
2 10 MBit/s
2 100 MBit/s
2 1000 MBit/s
0 Half duplex
1 Full duplexFull duplex
2
0 Unavailable
1 off
2 on
Industrieprotokolle
17.4 PROFINET
483