Belden Hirschmann RSPE Referenzhandbuch Seite 1163

Industrieprotokolle
17.3 EtherNet/IP
Tab. 76:
Id Attribute
0x2 Switch
Temperature
0x3 Reserved
0x4 Switch Max Ports Get
0x5 Multicast
Settings (IGMP
Snooping)
0x6 Switch Existing
Ports
0x7 Switch Port
Control
0x8 Switch Ports
Mapping
468
Class-Attribute (Forts.)
Access
Rule
Get
Get
Get/Set WORD
Get
Get/Set ARRAY of:
Get
Data type
STRUCT of:
INT TemperatureF
INT TemperatureC
UDINT
UINT
ARRAY of:
DWORD
DWORD
ARRAY of:
USINT
Description
in °F
in °C
Reserved for future use (always 0)
Maximum number of Ethernet Switch
Ports
0: IGMP Snooping
(0=disabled, 1=enabled)
1: IGMP Querier
(0=disabled, 1=enabled)
2: IGMP Querier Mode (read-
only)
(0=Non-Querier, 1=Querier)
3:
4: IGMP Querier Packet Version
Off=0 IGMP Querier disabled
5:
V1=1
6:
V2=2
7: V3=3
8: Treatment of Unknown
Multicasts:
9:
0=Send To All Ports
10:
1=Send To Query Ports
2=Discard
Bitmask of existing switch ports
Per bit starting with Bit 0 (=Port 1)
(0=Port not available, 1=Port
existing)
Array (bit mask) size is adjusted to
the size of maximum number of
switch ports (for max. 28 Ports 1
DWORD is used)
Bitmask Link Admin Status switch
ports
Per bit starting with Bit 0 (=Port 1)
(0=Port enabled, 1=Port disabled)
Array (bit mask) size is adjusted to
the size of maximum number of
Switch ports (for max. 28 Ports 1
DWORD is used)
Instance number of the Ethernet-
Link-Object
Starting with Index 0 (=Port 1)
All Ethernet Link Object Instances for
the existing Ethernet Switch Ports
(1..N, maximum number of ports).
When the entry is 0, the Ethernet Link
Object for this port does not exist
UM Config RSPE
Release 8.7.02 07/2021