Other Settings - Kenwood KMM-BT506DAB Bedienungsanleitung

Digital Radio
• "DGTL" lights up when receiving DAB digital signal and flashes when
receiving a RDS signal.
• The unit switches to DAB alarm automatically when receiving an alarm
signal from DAB broadcast.
Search for an ensemble
Press B SRC repeatedly to select DIGITAL AUDIO.
1
2 Press BAND repeatedly to select DB1/DB2/DB3.
Press and hold S / T to search for an ensemble.
3
4 Press S / T to select an ensemble, service or component to listen.
You can store up to 18 services.
• To store a service: Press and hold one of the number buttons (1 to 6).
• To select a stored service: Press one of the number buttons (1 to 6).
Select a service
1
Press to enter Service Search mode.
2 Turn the volume knob to select a service, then press the knob.
To cancel the Service Search mode, press
Select a service by name
1
Press to enter Service Search mode.
2 Turn the volume knob quickly to enter Alphabet Search mode.
Turn the volume knob or press S / T to select the character to be
3
searched for.
• Press 1 / 2 to go to the previous/next page.
4
Press the volume knob to start searching.
5
Turn the volume knob to select a service, then press the knob.
To cancel the Alphabet Search mode, press
8
ENGLISH
again.
again.

Other settings

1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
[TUNER SETTING]
Selects the searching method for S / T buttons when pressed.
[SEEK MODE]
[AUTO1]: Select an ensemble, service or component. Pressing and holding
S / T automatically search for an ensemble. ; [AUTO2]: Search for a
preset service. ; [MANUAL]: Select an ensemble, service or component.
Pressing and holding S / T manually search for an ensemble.
[AF SET] [ON]:
While listening to DAB: Automatically switch to FM broadcasting the same
program if the DAB signal becomes weak. It will switch back to DAB sound
when the signal becomes strong again.
While listening to FM: Automatically switch to DIGITAL AUDIO source
broadcasting the same program (if available). ;
[OFF]: Cancels.
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if
available ("TI" indicator lights up). ; [OFF]: Cancels.
[PTY SEARCH] 1 Turn the volume knob to select the available Program Type (see
"Available Program Type for [PTY SEARCH]" on page 9), then press
the knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/
[FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching.
.
Default: [XX]