Connection Diagrams; Install The Hardware - Axis Communications Q60 Serie Installationsanleitung

AXIS Q60 Series

Connection Diagrams

I/O Connector
1
0 V DC (-)
2
DC output 3.3 V, max 250 mA
A
I/O configured as input
B
I/O configured as output

Install the hardware

Read all the instructions before installing the product. Some installation steps would benefit from
being completed together because they require removal of the dome cover.
NO NO NO TICE TICE TICE
• Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required.
All cables connecting the product to the network and that are routed outdoors or in
demanding electrical environments shall be intended for their specific use. Make sure that
the network devices are installed in accordance with the manufacturer's instructions. For
information about regulatory requirements, see Regulatory information on page 4.
• Mount the product with the dome cover facing downward.
20