Zooming In On A Picture; Adjusting The Position Of The Inset Picture (For Pinp Only) - Sony FWD-40LX1 Bedienungsanleitung

Sub: Activates the inset picture.
Swap: Swaps the main and the inset pictures.
While not showing the menu screen, the main
picture will be activated when you press < on
the Remote Commander, and the inset picture will
be activated when you press , on the Remote
Commander.

Zooming in on a picture

When P&P is selected
1
Select "Picture Size" with M/m and press ENTER.
2
Keep pressing </, to change the size of the
picture, then press ENTER.
When PinP is selected
1
Select "Picture Size" with M/m and press ENTER.
The following appears on the screen.
PICTURE AND PICTURE(PAP)
PAP: PinP
Active Picture: Main
Picture Size: Large
Picture Position Small
Select Set
ENTER
2
Press M/m to select the size, then press ENTER.
Large: Increases the size of the inset picture.
Small: Decreases the size of the inset picture.
Adjusting the position of the inset
picture (For PinP only)
1
Select "Picture Position" with M/m and press
ENTER.
PICTURE AND PICTURE(PAP)
PAP: PinP
Active Picture: Main
Picture Size: Small
Picture Position
Select Set
ENTER
2
Adjust the position of the inset picture with M/m/
</,, then press ENTER.
Exit
MENU
Exit
MENU
Viewing two pictures at the same time
Notes
• You can show two pictures only when "Multi
Display" is set to "Off."
• While showing two pictures, the settings of
"Brightness" and "Contrast" adjust the balance
between the two pictures.
• You can select any of the following combinations of
input signals for the PICTURE AND PICTURE
function.
• The input system for the picture on the right or the
inset picture is displayed in the upper right on the
screen. And under this, color system or resolution/
vertical frequency is displayed for the Active Picture.
PC PC
+
(Digital) (Analog)
Input1 + Input2
Input1 + -FW12
BKM
Input1 + -FW11
BKM
Input1 + -FW50
BKM
+ Component
PC
Input1 + -FW11
BKM
Input1 + Input2
Input2 + -FW11
BKM
Input1 + -FW12
BKM
Input2 + -FW12
BKM
Video/
+ Component
S video
-FW10 + Input2*
BKM
Digital
+ Component
Video
Input1 + -FW11
BKM
Input1 + Input2
Input1 + -FW12
BKM
• While using the combination marked with *, the
Closed Caption and Auto Wide functions work only
while inputting signals from the BKM-FW10, BKM-
FW11 or BKM-FW12.
• 2 motion pictures of different TV systems may not
be displayed properly due to difference in the signal
format.
Video/
+
PC
S Video
Input1 + -FW10
BKM
Input2 + -FW10
BKM
PC Digital
+
(Analog) Video
Input2 + Input1
-FW12 + Input1
BKM
-FW11 + Input1
BKM
Component
Component +
(up to 480i)
Input2 + -FW11*
BKM
Input2 + -FW12*
BKM
Digital Video/
+
Video S video
Input1 + -FW10
BKM
Recommended combinations
33
(GB)