Setting The Aspect - Sony FWD-40LX1 Bedienungsanleitung

3
Press M/m to move the cursor (yellow) to "Wide
Setup" and press ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Wide Setup
Auto Wide: On
4:3 Mode: Wide Zoom
Select Set
ENTER
4
Press M/m to move the cursor (yellow) to "Auto
Wide" and press ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Wide Setup
Auto Wide: On Off
4:3 Mode: On Wide Zoom
Select Set
ENTER
5
Select the Auto Wide setting with M/m.
Off: Images are reproduced as-is.
On: The image is enlarged and displayed in the
most appropriate aspect ratio.
6
Press ENTER.
The screen returns to the screen shown in step 3.
7
Select "4:3 Mode" with M/m and press ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Wide Setup
Auto Wide: On
4:3 Mode: Wide Zoom Normal
Wide Zoom
Select Set
ENTER
8
Select the 4:3 Mode with M/m.
Normal: Pictures with a 4:3 aspect ratio are
displayed as-is.
Wide Zoom: Pictures with a 4:3 aspect ratio are
displayed after being enlarged to an aspect
ratio of 16:9.
9
Press ENTER.
The menu returns to the Wide Setup menu.
Note
• While inputting DVI or RGB signals, you cannot set
the Auto Wide because the Auto Wide function does
not work.
Exit
MENU
Exit
MENU
Exit
MENU
• While showing two pictures using the combination
of Component + Component, the Auto Wide
function works only while inputting signals from the
BKM-FW11 or BKM-FW12.

Setting the Aspect

Pictures can also be enlarged to the desired wide
mode regardless of the type of picture.
1
In the SCREEN CONTROL menu, press M/m to
move the cursor (yellow) to "Aspect" and press
ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Multi Display Setup
Wide Setup
Aspect: Wide Zoom Wide Zoom
Adjust Screen Zoom
Over Scan: Subtitle
Full
Normal
Select Set
ENTER
2
Select the Aspect with M/m.
Wide Zoom: Enlarges 4:3 pictures full-screen to
16:9 pictures.
Zoom: Enlarges the picture all the way to the left
and right edges of the screen. (Black bars may
remain on the top and bottom of the screen,
depending on the type of picture.)
Subtitle: Enlarges the picture all the way to the left
and right edges of the screen and compresses
only the area where captions are displayed.
Full: Extends the left and right sides of the picture
to cover the entire screen without changing the
top and bottom.
Normal: Displays the picture without enlarging it.
3
Press ENTER.
The menu returns to the SCREEN CONTROL
menu.
Notes
• You cannot set the Aspect while using the PICTURE
AND PICTURE function or the Multi Display.
• If you set Aspect, the Auto Wide function is
disabled. If you want to use the Auto Wide function,
reset it to "On."
• The top or bottom of the picture may be cut off or
the captions may not completely be displayed on the
screen depending on the type and size of picture.
• Please note that showing enlarged/compressed
pictures for commercial purposes or public viewing
at hotels or coffee shops can be copyright
infringement as defined under the copyright laws.
Picture Enlargement
Exit
MENU
29
(GB)