Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The carrier is equipped with wheel holders (sliding/adjustable) which can be used
to transport any bike stable and safe. To save space (during storage and
transport) these wheel holders can be pushed in. When you use the carrier for
the first time the wheel holders are folded in. It's convenient to unfold the 4
wheel holders now.
Then fold the two arms of the
carrier down and outwards
(As shown in the picture).
Turn the license plate holder back anti-clockwise until it clicks and locks itself.
To do this turn the two plastic knobs (on each wheel
holder) a bit loose and push the wheel holder out
(up). Then tighten the knobs again. Do this with all
four wheel holders.
Plastic knobs
Now connect the electric connector (7 or 13 pin).
Always make sure that the license
plate holder is really locked.
Detail:
38
Werbung
Inhaltsverzeichnis
