Checking The Zero Point - Pioneer SGY-PM900H90 Benutzerhandbuch

Checking the Zero Point

1. Position the crank arm so it is
perpendicular to the ground.
2. Tap [Pedaling Monitor R] in
the sensor list screen of the
SGX-CA900.
3. Confirm the value in [Force
Preview].
Make sure that the [Tangential
Direction Force] and [Radial Direction
Force] values are as shown here.
• Tangential Direction Force: 0 ± 3 N
• Radial Direction Force: 0 ± 3 N
Calibrating the Sensors
Calibration of the right side is
finished. Calibrate the left side in the
same way.
Re-attach the pedals to your bicycle
when both the left and right Zero
Point calibrations are completed.
EN
13