User Settings - Tunturi C85-F Benutzerhandbuch

- The cue message in the screen: "Slow down"/
"Speed up"/ "Speed ok" informs the user to
speed up or slow down.
- When pressing the jog wheel button the program
switch to the next Training Mode without prompt
message.
- The X axis denote time in minutes between 0~30.
It is updated once every 15 minutes during workout
screen:
- The Y-axis unit is Nm
- The bar chart show torque value Nm. Rotate the jog
wheel to adjust the Nm value
- The white dot line shows current position, which
moves rightward as workout time increases. The
workout screen could show 5-hour data at most
- The orange curve shows the user's actual heart rate,
which varies as the heart rate frequency goes up
and down
- The upper right corner of screen shows the final
countdown time of current active Training mode, it
resets when switches to the next Training mode.
- The bottom left corner of screen shows cue
message: Slow down/ Speed up/ Speed ok to
remind the user to speed up or slow down
- Press Back/stop, Main menu button to leave the
workout screen
Training mode screen (Fig. 37)
To stop your workout see:
"End your workout"

User settings

Press "User/Settings" button to enter the User/Settings
main menu.
- Use the jog wheel to select one of the six available
items.
- Press the jog wheel button for confirmation to enter
the selected item setting screen
User Log
By selecting the "User Log" you can: view the training
data of the selected user.
You can view either the last training session data or a
summary of all the user's sessions. (fig. F-33)
Exit the training data by pressing
BACK/STOP.
User setting
By selecting the "User Setting" you can:
- Adjust the brightness (Default=50%)
- Check the total mileages of the machine.
- Check the total used time for the machine.
- Check the default firmware and software version of
Console
- Change language
- Select button beep sound on(yes) or off (NO)
User setting window. (Fig. F-35)
How to modify settings
- Turn jog wheel to select changeable item.
- Press jog wheel to open selected item in right side
of the screen for edit..
- Turn jog wheel to change value of selected.
- Press jog wheel to confirm change.
- Turn jog wheel to select next item, or use Back/
Stop button to go back to setting menu.
Edit User
By selecting the Edit User you can edit: (Fig. F-34)
User name:
- Turn jog wheel and select "Name"
- Press jog wheel to open "Name"edit.
- Turn jog wheel to select letter
- Press jog wheel to confirm
- Turn jog wheel to select next letter
- When name is edit correctly than select "√" to
confirm name and go back to Edit user Menu
Units, Display
- Turn jog wheel and select "Units"
- Press jog wheel to open "Units" edit
- Turn jog wheel to select
Metric: show units in km/kph/Kcal
Imperial: show units in mile/mph/kcal
- Press jog wheel to confirm and go back to Edit user
Menu
Display
- Turn jog wheel and select "Display"
- Press jog wheel to open "Display" edit
- Turn jog wheel to select
Count up: preset time/ distance will be counting up
Count Down: preset time/ distance will be counting
down.
- Press jog wheel to confirm and go back to Edit user
Menu
Gender
- Turn jog wheel and select "Gender"
- Press jog wheel to open "Gender" edit
- Turn jog wheel to select Male/ Female
3 3
English