Herunterladen Inhalt Inhalt Diese Seite drucken

Miele SD-Serie Gebrauchsanweisung Seite 38

Bodenstaubsauger
Vorschau ausblenden Andere Handbücher für SD-Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en
Connecting the suction hose to the
handle (Fig. 03)
 Fit the connector at the other end of
the suction hose into the handle until
it clicks into position.
Connecting the handle to the suction
tube (Fig. 04)
 Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
 To detach the handle from the suction
tube, press the release catch and pull
the handle out of the suction tube,
twisting it slightly as you do so.
Connecting the suction tube to the
adjustable floorhead (Fig. 05)
 Push the suction tube into the floor-
head and turn it clockwise or anti-
clockwise until it clicks into position.
 To separate the suction tube from the
floorhead press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Activating the timestrip® filter
change indicator on the exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (Fig.
06):
a AirClean
b AirClean Plus 50 (light blue)
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
38
If your vacuum cleaner is fitted with fil-
ter c, d or e, you need to activate the
timestrip® filter change indicator.
 Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (Fig. 07).
 Remove the indicator strip (Fig. 08).
 Press the timestrip® filter change in-
dicator (Fig. 09).
After approx. 10–15 seconds, a thin red
line will appear in the left-hand side of
the display (Fig. 10).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the timestrip® filter change in-
dicator works
The timestrip® filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50 oper-
ating hours the display will be com-
pletely filled with red (Fig. 11). 50 oper-
ating hours equates to approximately
one year of use.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis