Cleaning And Care - Klarstein BARISTOMAT 10033138 Bedienungsanleitung

EN
32

CLEANING AND CARE

Cleaning the device ensures a long service life for the device.
Regular cleaning of the milk system prevents damage to the health from food
poisoning.
Switch off the device and unplug the power cord from the socket to avoid damage.
Let the device cool down completely.
Note: Before cleaning, make sure the device has cooled down completely to
avoid damage to the device and burns. The device gets hot during operation
and will retain heat for a while after operation.
Carefully remove the drip grid, drip tray and milk system from the device. To
remove the milk system:
1 Remove the frother.
2 Press the release button on the milk tank.
3 Carefully pull out the milk tank.
4 Lift the top of the milk tank.
• Soak the drip grid, drip tray, frother and milk tank for some in lukewarm water
to loosen the liquid residue.
• Now clean the components thoroughly with hot water, a food-safe cleaning
agent and a soft, non-abrasive sponge.
• Allow the components to dry thoroughly.
• Clean the outside of the device with a damp cloth, warm water and a drop of
food-safe detergent, then dry it with a cloth.
• Put the milk tank back together.
• Make sure the device is turned off.
• Refit the components as described under ASSEMBLY.
Storage
• Before storing the device, switch it off and disconnect it from the power
supply.
• Clean it, if necessary.
• Store the device in a clean, dry and cool environment.