Functions - Klarstein BARISTOMAT 10033138 Bedienungsanleitung

EN
22

FUNCTIONS

Programmes
The device can handle six programmes for preparing coffee and tea, optionally
with milk or milk foam.
Power-saving mode
If the device is not used for 5 minutes, it automatically switches to standby mode.
All lights will flash.
Press any key to bring the device out of standby.
Rapid cooling
The device is not designed for continuous operation. The device becomes hot in
continuous operation. The automatic cooling will switch on and the device will use
water from the water tank for cooling. It will release the heat as steam from the
steam outlet on the front of the device.
Note: Stay away from the device during automatic cooling. During automatic
cooling, hot steam will escape from the steam outlet on the front of the device,
the drip grid and the drip tray will be hot. Do not touch the device during
automatic cooling. Make sure that you let the device rest for 15 minutes after
each brewing process.
Safety stop
The device will not work if the water tank is empty or if the milk tank or the filter
insert has not been inserted or has been inserted incorrectly. In addition, the
device will emit an error tone:
Error tone Cause
Single The milk tank has not been
error tone, inserted or has not been
permanent inserted correctly.
The filter insert has not been
inserted or has not been
inserted correctly.
Double The water tank is empty.
error tone,
permanent
Solution
Insert the milk tank as described
in ASSEMBLY.
Insert the filter insert as
described in ASSEMBLY.
Fill the water tank as described
in ASSEMBLY.